The animal electrical stimulation sperm collector uses low voltage and small current alternating current to stimulate the low-level nerve center of the recommendation cone of animals such as mice, cattle, sheep, pigs, etc. After stimulation, animals will unconsciously produce ejaculation process to achieve the purpose of collecting animal sperm. Animals that can use the instrument to collect sperm, such as cattle, sheep, chickens, mice and so on.

Instrument parameters:

1. The power consumption of the whole machine is 200W

2. Electrical stimulation output voltage is divided into two levels

3. Electrical stimulation output current:<2A

4. Instrument power supply: AC 220V

Methods of work:

1. Insert one end of the power cord into the instrument panel socket, and connect the other end to 220V AC power supply.

Insert the two plugs of the stimulation electrode rod connection into the "output".

2. Before turning on the "power" switch, the switch in the lower right corner should be moved to the middle "off" state.

3. Power Input is off.

4. Select voltage, select 0~50V voltage output up; select 0~15V voltage output down.

5. By rotating the "voltage adjustment", the knob can adjust the size of the stimulation voltage. Clockwise rotation voltage or current increases; counterclockwise rotation voltage or current decreases, at this time you can see the corresponding output voltage value on the voltmeter.

6. When the instrument is selected as "manual" operation, the "output selection" switch is divided into three gears,

Standard configuration:

One host computer of animal electrical stimulation spermatometer

Stimulation electrode rod (different configuration according to different animal stimulation rod)

One power cord

A copy of the instructions