MT-CA Electronic Automatic Moisture Analyzer The drying method selected from the method list, each method including drying temperature, drying time and sample weight. The samples were weighed with a built-in balance. The sample was placed on a turntable in the drying chamber. The drying process runs fully automatically.

2. principle

1. Data output to the printer can be selected by connecting to an alternate printer.

2. The drying room for weighing MT-C in the drying room can pass through a door with an observation window. The turntable in the drying chamber can hold 10 samples.

The fan blows air into the drying chamber through the electric heating element. The temperature inside the drying chamber is controlled by an electronic temperature controller and an RTD.

The sample is weighed quickly and reliably with an electronic balance installed under the drying chamber. The sample is weighed outside the drying chamber before drying. After drying, the sample is automatically weighed in the drying chamber when it is still hot.

This test process is designed to dry the hot state complex scale, which not only avoids the time spent in the oven cooling, but also eliminates the resulting measurement error; to avoid weighing errors.