Plasti-Corder Lab-Station/Lab-Station EC is Brabender company's torque rheometer, suitable for laboratory research and simulation, is a product-oriented measurement and control system, includingRaw material development and formula researchMaterial performance testingProduction processStudy of scale sample productionTechnology.Suitable for testing and research on thermoplastic materials, thermosetting materials, elastomers, ceramic mold materials, fillers, pigments, and other plastic substances and modified materials, with a wide range of tests.

Power: 16KW
Control system: Can-Bus LCD panel touch/software control (automatic data acquisition)
Torque measurement range: 0-400Nm (speed case)
Torque measurement accuracy: 0.15%
Motor speed: 0.2-350 rpm (under torque)
Speed accuracy: 0.2%, closed-loop control

EHT 50 internal mixer (electric heating/oil heating)
3 heating sections, heating temperature: up to 500 ℃
Speed ratio: 2:3
Made of stainless steel
Volume of mixer: 120 cubic centimeters
Temperature control: electric heating and compressed air cooling
Torque: 0 - 200 Newton meters

350 type large volume mixer (electric heating/oil heating)
Mixer total volume: 675 cubic centimeters
Three temperature control zones
Working temperature: 300 ℃/500 ℃
Torque: 400Nm
Left to right blade speed ratio: 3:2

Planetary mixer P600
planetary rotor
Temperature: up to 150°C
Volume of mixer: about 2500 cubic centimeters
Torque: 0 - 5 Newton meters
Electronic and mechanical overload protection function
Includes thermocouple to measure temperature

Mixer system software: WINMIX, based on WIN7
Melting of PVC ASTM D2538
Heat and shear stability of resins
single screw extruder:
Model 19/25D Extruder
Variable feeding device, interchangeable feeding zone, multiple measuring ports along the barrel

Rubber 19/10DW type extruder
Feed roller, short processing length, needle barrel, expandable

Ceramic 19/20DN type extruder
Liquid heating, trough barrel, pneumatic feeding device

twin screw extruder:

TSE20/40D (general laboratory type)
Can be used for blending of polymer materials, fillers, agents and additives
Torque: 320Nm
Speed: 1200rmp, configuration gearbox 4:1

ProcessTemperature control: electric heating and water cooling
Temperature: 400°C
Pressure: 300bar
Die coupling: 2 3/4 "wire buckle
Water distribution system, including solenoid control valve cooling device
Electrical appliances installed in different cavities
Cooling treatment device
Cooling power: 15 kW at 90°C
Heating power: 1.7 kW
Circulating pump: max5 bar/30 Ltr./min

TSE25/16 ~ 52D (Multi-function extruder)
Can be applied to multi-stage mixing processPilot laboratory, which can also be used for reactive extrusion and formulation developmentExtruder can reach 0.5~50 kg/h

KETSE 12/36D small mixing double screw machine (suitable for precious materials research)
Power only 2.4KW
Speed up to 600rmp
Vertical and side feed
Interchangeable screw original

KETSE 20/40D Laboratory Mixer
Clamshell Barrel
Variable machining length
Vertical and side feed
Interchangeable screw original
Compact design
For materials research and process simulation
Clamshell barrel can be divided horizontally and can be tilted on both sides, so that the evaluation of individual processing steps can be visualized.
Can be equipped with Brabender original side feeder and metering pump and other accessories

CTSE reverse conical double screw machine (for PVC)
Reverse rotation
Conical Screw Design
constant material transfer
Degassing opening
The conical twin-screw machine can be used for laboratory-scale production, including pressure/temperature measurement in the emptying zone, inside the barrel and at the top of the screw

Downstream mould and test line:
Pellet line
Film (flat film, blown film) test line
Cable test line
Pipe test line
Polymer Journal Analysis System
thermal expansion analysis system
Rubber extrusion test system